Sor 1100 Series Magnetic Level Indicators Uživatelský manuál stáhnout pdf (Strana 1)

Form 1597 (09.14) ©SOR Inc.

1/4

The 1100 Series Magnetic Level Indicator from SOR

represents best

in class performance and value thanks to decades of experience and

innovation. Each unit is custom engineered for your exact application

and manufactured to our rigorous quality standards. SOR level gauges

are an ideal replacement for existing process sight gauge systems and

can easily become a functional bridle system for use with level switches,

transmitters, and temperature measurement.

The 1100 Series provides visual indication of liquid level within a larger,

primary process vessel. Once the MLI is mounted to the process vessel

via the supplied process connections, the process liquid will flow freely up

and down within the MLI chamber. A specially designed float is located

inside the 1100 Series chamber and floats along with the process level.

This float contains a powerful magnet that interacts with the non-invasive

indicator assembly located on the outside of the chamber. This magnetic

coupling between the float and the indicator allows the process level to be

shown via the use of rotating flags housed inside the assembly. As the

level rises and falls, these flags will change color and provide real time

indication of the liquid level within the primary process vessel.

1100 Series

Magnetic Level Indicator

General Instructions

NOTE: If you suspect that a product is defective, contact the factory or the SOR Representative

in your area for a return authorization number (RMA). This product should only be installed by

trained and competent personnel.

Design and specifications are subject to change without notice.

For latest revision, go to SORInc.com

Registered Quality System to ISO 9001

Installation

MOUNTING

Before assembling Level Gauge to your process, check for the following:

 Vessel nozzles should be checked for horizontal and vertical alignment.

 Vessel nozzles must be straight and even, with no bends.

 Center-to-center distance of gauge and vessel nozzles must match.

 Vessel and gauge nozzles should be free of sediment, dust and rust.

PREVENTIVE MAINTENANCE

Periodic inspection will keep your level gauge operating properly for many years.

These gauges provide visual level indication on critical services, and a systematic

program of preventative maintenance will provide excellent long-term protection. Close

attention to the following “what to do” and “what to avoid” tips in your maintenance

program are necessary to ensure satisfactory service.

1 2 3 4

Shrnutí obsahu

Strany 1 - Magnetic Level Indicator

Form 1597 (09.14) ©SOR Inc. 1/4The 1100 Series Magnetic Level Indicator from SOR® represents best in class performance and value thanks to decades of

2/4Form 1597 (09.14) ©SOR Inc. WHAT TO DO Keep your Level Gauge clean inside and out. If you have solids/debris in your process, or if it tends to

Strany 3 - Troubleshooting

Form 1597 (09.14) ©SOR Inc. 3/4SYMPTOM POSSIBLE CAUSECHECK THIS...CORRECTIVE ACTIONNo visual signal or electronic output on optional transmitterFloat

Strany 4 - SORInc.com

4/4Form 1597 (09.14) ©SOR Inc. 14685 West 105th Street, Lenexa, KS 66215  913-888-2630  800-676-6794 USA  Fax 913-888-0767SORInc.comRegistere

Komentáře k této Příručce

Žádné komentáře

Sor 1100 Series Magnetic Level Indicators Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Sor 1100 Series Magnetic Level Indicators. SOR 1100 Series Magnetic Level Indicators User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Sor 1100 Series Magnetic Level Indicators Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Sor 1100 Series Magnetic Level Indicators. SOR 1100 Series Magnetic Level Indicators User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Senzory Sor 1100 Series Magnetic Level Indicators